2019年10月25日星期五

what is clean room door and window and how to install

Steel clean room door

The steel clean room door frame and door panel are all made of one-piece. The surface is treated by electrostatic spraying. The product has no seams, solder joints, dead corners, and is flat and smooth. It is easy to clean and dust-free. The three sides of the door are made of high-grade rubber and plastic sealing strips, and the bottom is made of automatic lifting sweeper. It has strong air tightness and effectively ensures the indoor purification effect. The observation window is made of double-layer tempered glass with four weeks of inlay. Two centi-meter printing black edge, glass flush with the surface of the door panel, which is sealed, firm and beautiful. The core material of the door panel is filled with high-strength flame-retardant core material, which fully meets the fire protection requirements of the clean room workshop.

The wall suitable for installation of this door is 50mm-100mm manual type cleanroom sandwich panel and various sizes of civil walls. The door frame and the wall are connected by “中“ shape aluminum profile which it is easy to operate. Both sides of the door frame and the wall are flush. It is the best choice for the purification workshop, no matter from the angle of strength or beauty. Product size, material and special requirements can be customized according to the needs of customers.
 
It has good sealing performance, high strength, easy to open and flexible installation. The door frame is connected with the wall panel by aluminum profile, flush with both sides of the wall. The thickness of the partition wall, product size, material and special requirements can be customized according to the use requirements.



Hollow double-layer clean room window

The double-layer printing cleanroom window has the characteristics of good airtight performance, the wall and the window are in the same plane, flexible installation and beautiful appearance. It can be made according to different wall thickness, especially suitable for 50 ~ 100mm thick color steel sandwich panel, double-layer window, hollow type, moisture-proof type.


Clean room window performance

Sound insulation: to meet people's needs for lighting, viewing, decoration and environmental protection, the general hollow glass can reduce the noise by about 30dB, while the inert gas filled hollow glass can reduce the noise by about 5dB on the original basis, which can reduce the noise of 80dB to 45dB.


Clean room window Good thermal insulation performance

K value of heat conduction system: the K value of single 6mm glass is 5.75kcal/mh, and the K value of general hollow glass is 1.4-2.9kcal/mh. For hollow glass filled with argon and sulfur fluoride gas, the K value can be reduced to 1.19kcal/mh. Argon is mainly used to reduce the K value of heat conduction, while sulfur fluoride gas is mainly used to reduce the noise DB value. The two gases can be used alone or mixed in a certain proportion.

Clean room window Anti condensation

In winter, when the indoor and outdoor temperature is high, there will be condensation in single glass doors and windows, but there is no condensation in double hollow glass.

Hollow double-layer glass can meet the needs of customers, making non-standard products of different specifications and models. Different shapes and grades of glass can be selected for door leaf windows, such as toughened glass, fireproof glass and bulletproof glass.



Clean doors and windows are widely used in pharmaceutical, food, biological, electronic plants and other workshops.

For more information, you can VISIT US or CONTACT US.

When installing clean room panel, you must know clearly the sequence of installation

Clean room panel is used for wall and ceiling for clean room projects like hospital, pharma, lab, eletronic, biotechnology, food industry ect. But how to install cleanroom panel

When installing clean room panel, you must know clearly the sequence of installation.

In the construction site of installing the color steel sandwich panel, the operator should know clearly the sequence of installation, division of labor and cooperation. The labor intensity should be basically equal, the cooperation is orderly, busy but not disorderly. In addition, some people are also required to clean up the construction site, tidy up the odds and ends, and help wherever needed.
As for this, it is because in the construction site, when fixing groove aluminum, it needs to drill holes with electric hammer, so it is easy to produce dust. If it is not cleaned in time, the whole ground and aluminum profiles are covered with dust due to the movement of personnel in the construction process. When installing wall panel, soil fingerprints are everywhere. It is not conducive to uniform cleaning when manual work is done on that day. The process control of dust brings difficulties to scrubbing in the future. In addition, when cutting aluminum profiles, sharp-angle debris can easily stick to its feet if it is not cleaned in time, which will cause potential safety hazards. If the cut pieces are not classified and stacked in time, it is easy to scratch the installed color steel sandwich panel and form waste products. Therefore, in the process of installing the color steel sandwich panel, it is easy to scratch the installed color steel sandwich plate. It is very necessary to make reasonable arrangements for manpower.

For more information, you can VISIT US or CONTACT US.

2019年10月10日星期四


What is the application scope of sandwich panel?


Generally speaking, sandwich panels can be applied to almost all kinds of different building needs, including industrial buildings, public buildings, composite houses, purification engineering, clean room projects and other fields.

Public announcement building
Sandwich panels are mainly used in roofs and exterior walls of public buildings with large space requirements, such as waiting halls, stadiums, cinemas and auditoriums, exhibition halls and Exhibition centers, museums, etc. Because public buildings need to provide more space, indoor air conditioning, fire prevention and other characteristics of a series of industrial plants, such buildings mostly use the roof truss structure form of grid or pipe truss, so the materials of roof panels in light, thermal insulation, and heat insulation, fire safety, waterproof, sound absorption, durability and other aspects put forward higher requirements.

Industrial plant, warehouse
Sandwich panels are mainly used in the roofs and exterior walls of industrial workshops and warehouses. In the past, prefabricated concrete slabs or asbestos board were mostly used in the roofs of industrial workshops., with the rapid promotion of light steel structure, sandwich board has also replaced the above two materials with a number of significant advantages. While providing better thermal insulation effect, sandwich board with mature light steel structure can truly reflect a series of advantages of light steel system, such as light weight, fast and efficient, flexible layout and so on. Therefore, sandwich board has become the preferred scheme in single-storey factory buildings. For multi-storey industrial buildings, besides sandwich panels for roofing, sandwich panels can also be used for exterior walls to beautify buildings through the changeable color and shape of sandwich panels. For industrial buildings requiring constant temperature and humidity, the use of sandwich panels with better thermal performance than brick walls as enclosure materials can greatly save the construction cost.

Clean room field
With the continuous progress of society, electronics and medicine industries are developing rapidly. In the manufacturing process of products in these industries, it is necessary to provide a cleaner production environment. Because the color-coated sandwich panels on their surfaces are not easy to adhere to dust, are easy to clean and have fewer joints, so the sandwich panels, as interior walls and ceiling materials, are widely used in production and workers with clean requirements. In the working environment, applications include electronic and computer products manufacturing, medical supplies and pharmaceutical production, aerospace, precision instrument manufacturing, food production, medical operating room and other industries. Although the cleanliness requirement of some factories is not high, sandwich panels are widely used as partition walls in factories because of their flexible disassembly and assembly.

To know about the sandwich panel cost, you can kindly ask a quote.